How to Remove the Spray Head from Your Bunn Coffee Maker: Step-by-Step Guide

I am a coffee lover, and having a good coffee maker at home is essential for me. My Bunn coffee maker has been my trusted companion for years, providing me with a perfect cup of coffee every morning. However, recently I noticed that the spray head of my Bunn coffee maker needed cleaning. After doing some research, I found out that removing the spray head is a necessary step in cleaning the coffee maker thoroughly. In this article, I will guide you step-by-step on how to remove the spray head from your Bunn coffee maker.

Why should you remove the spray head?

The spray head is an essential part of your Bunn coffee maker. It is responsible for evenly distributing hot water over the coffee grounds, ensuring a rich and flavorful brew. However, over time, mineral deposits and coffee oils can build up on the spray head, affecting its performance. If you notice that your coffee is not brewing as it used to or if you see water spraying erratically, it’s a clear sign that your spray head needs cleaning.

Step 1: Turn off and unplug your coffee maker

Before starting any maintenance or cleaning procedure, it’s crucial to ensure your coffee maker is turned off and unplugged. This step guarantees your safety and prevents any accidental injuries.

Step 2: Remove the spray head cover

The spray head cover is located on the front of your Bunn coffee maker, just above the brew basket. To remove it, gently pull it forward using your fingers. If you encounter any resistance, try wiggling it back and forth while pulling. Be careful not to use excessive force to avoid damaging the spray head cover.

Step 3: Detach the spray head

Once the spray head cover is removed, you will have access to the spray head. Using your fingers, firmly grip the spray head and twist it counterclockwise. This motion will loosen the spray head from its position. Continue twisting until the spray head is detached from the coffee maker.

Step 4: Clean the spray head

Now that you have successfully removed the spray head from your Bunn coffee maker, it’s time to clean it thoroughly. Start by rinsing the spray head under warm running water. This will help remove any loose coffee grounds or residue.

To completely eliminate any mineral deposits or coffee oils, you can soak the spray head in a solution of equal parts water and white vinegar for about 15 minutes. The acidity of the vinegar will help dissolve and remove the stubborn build-up. After soaking, give the spray head a final rinse under warm water to remove any lingering vinegar smell.

Step 5: Reattach the spray head

Once the spray head is clean and rinsed, it’s time to reattach it to your Bunn coffee maker. Align the spray head with the opening where it was originally located. As you gently push the spray head in, twist it clockwise until it is firmly in place. Ensure that it is securely attached to avoid any leakage during the brewing process.

Step 6: Replace the spray head cover

After reattaching the spray head, it’s time to put the spray head cover back in its original position. Align the cover with the opening where it belongs and push it back until it is snugly fitted. Ensure that all sides are properly aligned to prevent any gaps.

Step 7: Test your coffee maker

Now that you have successfully removed, cleaned, and reattached the spray head, it’s time to test your coffee maker. Fill the water reservoir with fresh water and add the desired amount of coffee grounds to the brew basket. Turn on your coffee maker and let it brew a full pot of coffee. Observe if the water is spraying evenly and if the brewing process is back to its optimal performance. If necessary, repeat the cleaning process or seek professional assistance.


Maintaining your Bunn coffee maker is essential to ensure its longevity and optimal performance. Regularly removing and cleaning the spray head is a crucial step to prevent any build-up that can affect the quality of your coffee. By following the simple step-by-step guide provided in this article, you can easily remove the spray head from your Bunn coffee maker and enjoy a perfect cup of coffee every time. Remember to always prioritize your safety by turning off and unplugging your coffee maker before performing any maintenance procedures.

Leave a Comment