Are you tired of your old coffee table? Looking for a way to transform it into something stylish and unique? Well, look no further because I have the perfect solution for you – turning your coffee table into a stylish upholstered bench. With just a few simple steps, you can give your old coffee table a new lease on life and create a stunning piece of furniture that will be the centerpiece of your living room. In this article, I will guide you through the step-by-step process of transforming your coffee table into a stylish upholstered bench. So, let’s get started!
Materials You Will Need
Before we begin, let’s gather all the materials that you will need for this project. Here’s a list of what you’ll need:
– A coffee table
– Plywood sheet
– Foam padding
– Batting
– Upholstery fabric
– Staple gun
– Screwdriver
– Screws
– Scissors
– Measuring tape
– Sandpaper
– Paint or stain (optional)
– Drill (optional)
– Decorative legs (optional)
Step 1: Prepare Your Coffee Table
The first step in this project is to prepare your coffee table for transformation. Start by removing any existing hardware or accessories from the table, such as knobs or drawers. Use a screwdriver to carefully unscrew and remove them.
Step 2: Sand and Stain (Optional)
If you want to give your coffee table a new look, now is the time to sand and stain it. Use sandpaper to smooth out any rough edges or imperfections on the surface of the table. Once you’re satisfied with the smoothness, choose a stain color that matches your aesthetics and apply it according to the manufacturer’s instructions. Allow the stain to dry completely before proceeding to the next step.
Step 3: Add Decorative Legs (Optional)
To create a more stylish and elevated look for your upholstered bench, you can add decorative legs to your coffee table. This step is purely optional, but it can make a significant difference in the overall appearance of your bench. Measure and mark the positions for the legs on the underside of the coffee table. Use a drill to create pilot holes, then attach the legs using screws.
Step 4: Measure and Cut the Plywood Sheet
Now, it’s time to measure and cut the plywood sheet that will be the base of your upholstered bench. Measure the length and width of the top surface of the coffee table and add a few extra inches to each measurement. This will ensure that the plywood will cover the entire surface and allow for padding and fabric to be wrapped around the edges. Use a saw or a jigsaw to cut the plywood sheet according to your measurements.
Step 5: Attach Foam Padding
To make your upholstered bench comfortable to sit on, you’ll need to attach foam padding to the plywood sheet. Measure the dimensions of the plywood and cut the foam padding to match. You can use a serrated knife or scissors to cut the foam. Apply spray adhesive to the plywood sheet and press the foam firmly onto it. Allow the adhesive to dry completely before moving on to the next step.
Step 6: Add Batting
Next, add a layer of batting over the foam padding. Batting will provide an extra layer of softness to your upholstered bench. Cut the batting to match the dimensions of the plywood sheet and place it on top of the foam. Make sure to smooth out any wrinkles or folds in the batting.
Step 7: Attach Upholstery Fabric
Now comes the fun part – attaching the upholstery fabric to your bench. Choose a fabric that matches your decor and personal style. Lay the fabric flat on the floor, wrong side up. Place the batting-covered plywood sheet on top of the fabric, making sure that it is centered. Pull one side of the fabric up and over the plywood, and staple it in the middle of that side. Repeat this step on the opposite side, pulling the fabric tight, and stapling it in the middle. Continue stapling the fabric to the plywood along the remaining sides, pulling it taut as you go. Trim off any excess fabric.
Step 8: Attach the Upholstered Top to the Coffee Table
The final step is to attach the upholstered top to the coffee table. With the help of a friend, carefully flip the upholstered top upside down and place it on the coffee table. Use a staple gun or screws to secure the upholstered top to the coffee table, making sure it is centered and secure.
And there you have it – your coffee table transformed into a stylish upholstered bench! Now you can enjoy a comfortable and eye-catching seating option in your living room. Place some decorative pillows on top, and your new bench will become a cozy nook to relax and unwind.
In conclusion, transforming your coffee table into a stylish upholstered bench is a simple and rewarding DIY project that anyone can do. By following these step-by-step instructions, you can give your old coffee table a new life and create a unique piece of furniture that will impress your guests. So, gather your materials and get ready to unleash your creativity. Happy crafting!